Hi
I see that you are using 17a.
so would you mind using the latest DVBDream.
Here is the linker:
http://www.tbsdtv.com/download/document/common/dvbdream_v17b_oem_1.zip
Thanks
steven Wrote:Hi
I see that you are using 17a.
so would you mind using the latest DVBDream.
Here is the linker:
http://www.tbsdtv.com/download/document/common/dvbdream_v17b_oem_1.zip
Thanks
patmos Wrote:I have same problem since very long. No Signal on many tps. Contacted TBS. Make me test several drivers. But I can only use diver v 2.0.16 which came on the CD. From other users I understand that it affects only the USB version of the card. after my tests TBS support told that they found the cause of my problem....up to now no cure for it.
For ProgDVB I've given up. Here is TBS answer:
Hi,
It seems the new version of Progdvb haven't support TBS5922 yet,we need to talk with them.
I will let you know the new information later.
Best regards!
________________________________________
support
Hope we get a better service from TBS
imperia Wrote:I have installed the new driver, but I am at work now which means that I CAN'T physically restart the tuner which I usually do when I install new driver.
I am not sure if the correct firmware is uploaded to the device, because i haven't turned it off and then back on.
Still, I have remote desktop access. And I have made few scans.
For 19.2E it now finds Pay Per View Channels like: Sky Select HD, Fox HD, Blue Movie HD on different HIGH transponders. Nothing else is found, only those 3 channels are found on different transponders (HIGH).
LOW are still gone. Nothing.
For 23.5E - LOW are gone. frequencies have signal but "no channels found"
for HIGH - as soon as the scan passes 11700 mark..it starts to find channels. so..HIGH are OK.
Andrew Wrote:I tried powering up and plugging in the USB last night but my Astra 1N channels now seem to have gone for good!
Updated to the new driver and all the channel disappeared. After a reboot and power cycle of the 5922 the channels that did work, worked again (I only tried one or two) but all the previously missing channels were still missing.
Ummm, I should just check the new driver as installed correctly. Will check tonight...
Andre
Users browsing this forum: No registered users and 0 guests