Can't scan (Kernel 2.6.39-5)

[imperia]

I have the same issue with kernel 3.x:

Code: Select All Code

Dec 23 10:11:14 debian kernel: [  828.716162] DEBUG: 5922 tune checked
Dec 23 10:11:14 debian kernel: [  828.744274] DEBUG: 5922 tune checked
Dec 23 10:11:14 debian kernel: [  828.772258] DEBUG: 5922 tune checked
Dec 23 10:11:14 debian kernel: [  828.800243] DEBUG: 5922 tune checked
Dec 23 10:11:14 debian kernel: [  828.828227] DEBUG: 5922 tune checked
Dec 23 10:11:14 debian kernel: [  828.856213] DEBUG: 5922 tune checked
Dec 23 10:11:14 debian kernel: [  828.884198] DEBUG: 5922 tune checked
Dec 23 10:11:14 debian kernel: [  828.912185] DEBUG: 5922 tune checked

any solutions?

[Pasha49]

Hello! I have a problem. After rebooting, there is an error in dmesg:

Code: Select All Code

[49101.456278] TurboSight TBS 6984 Frontend:
[49101.456280] tbs6984fe - Current Delivery System and Mode are unknown
[49106.456175] TurboSight TBS 6984 Frontend:
[49106.456178] tbs6984fe - modulation 6 is not supported

Signal no. But after running scan-s2 signal appears, and everything works.
In dmesg remains only this error:

Code: Select All Code

[49155.376754] TurboSight TBS 6984 Frontend:
[49155.376757] tbs6984fe - modulation 6 is not supported

Last drivers.

P.S. I do not speak English, use a translator.