TBSDTV Community Forum

After updating driver to 1.0.1.3 card stop to work and gives info not signal detected. I've checked it in Media Portal and Prog DVB both in newest versions. It showed quality of signal 0 in both of them and can't find any program in scan mode. After revert back to 1.0.1.2 all is working fine.

Hi lukjod

Would you mind telling us which satellite and which Transponder you are using.
and what's you LNB type and setting?
Do you have used DiSeqc?

Just give us more information as you can,so we can take a test with your setting.

Thanks

Hi Steven
I'm using very simple setup with 1 lnb on Hot Bird provider Polish Cyfra without DiSeqc. Im also using Aston Crypt cam 2.26 version
I hope that will help You unbug it
rgds
Lukasz

Hi lukjod

Would you mind using this version DVBDream to have a test:
https://hotfile.com/dl/157132084/a65cbac/dvbdream_setup_v17c_oem_3.zip.html

after download it please use this linker to delete it :
https://hotfile.com/kill/157132084/252c81b50cde42e640743c8722b13277071d0c55.html

Because we just use this version DD to had a test,all is ok.

Kind Regards

steven

I can't tell you exactly what's wrong, but with 1.0.1.3 the support for MediaPortal is skrewed up too. Scanning for channels resulted in lot's of "No Signal" messages on more then half of the transponders. I reverted back to 1.0.1.2.

TBS 6828 + Unicam Deltacrypt (Sparta 5.33)
MediaPortal 1.2.2 Final
Windows 7 x64

Hi Steven
today I have tried DVBDream and all is working fine, but only on that soft You gave me link for. The rest including MediaPortal (my HTPC solution) works fine only on 1.0.1.2 driver on newest driver it gives no signal info

Hi lukjod&herrbasan

Would you mind using this new driver to have a test with MediaPortal.
V1.0.1.4:
https://hotfile.com/dl/157286452/5c6d85d/TBS6928_20120531-release.zip.html

And send your test report here.

Kind Regards

steven

I've tested the new version, and did a full channel scan. Where i had problems before ("No Signal" on many transponders) the new driver succeeded. I also tested the general functionality and the new driver worked quite well. I'll keep it and will report if i can find any errors. But so far, i'd would give it a "go"

Tested on:
Windows 7 x64
MediaPortal 1.2.3
Unicam Deltacrypt (Sparta 5.33) with V13 Sky Germany Card

Yes, all is ok, Media Portal works as espected. New version works very good
Thank You

Media Portal 1.2.2
Windows 7 32 bit

I'm very pleased with the support here. Added to the fact that the TBS 6928 is by far the best DVB hardware with CI Support out there, a quick an responsive support makes it a no-brain-er to recommend.

Good Job TBS