TBSDTV Community Forum

There is a problem with driver for windows 7 64bit
Please scan using transedit transponder 11681 V 27500 on 28.2 E with 1.0.4.4 and 1.0.4.5
Then scan this transponder with 1.0.4.2
Discover the difference

Thanks

Screenshots
Version 1.0.4.5: http://koce.dynalias.net/tmp1/DrvVer1045.jpg
Version 1.0.4.2: http://koce.dynalias.net/tmp1/DrvVer1042.jpg

hi All,

thank you for reporting this issue. i already fix it, here is the new driver:

File name: tbs6920driver_win7_v1.0.4.6.rar File size: 295.32 KB

and we will put official update on the website in the next days.

regards,
cody

Hello

New problem with drivers version 1.0.4.6.

On Eurobird 9A (9.0E), transporders:
12207/H/27500 - http://koce.dynalias.net/tmp1/Drv_1046_12207.jpg
12303/V/26400 - http://koce.dynalias.net/tmp1/Drv_1046_12303.jpg
No Signal with drivers 1.0.4.6.
With drivers 1.0.4.2, transporders:
12207/H/27500 - http://koce.dynalias.net/tmp1/Drv_1042_12207.jpg
12303/V/26400 - http://koce.dynalias.net/tmp1/Drv_1042_12303.jpg
Good Signal.

Transporders is a DVB-S2, FEC 2/3, around 12 Ghz.

regards,
Koce

1.0.4.2 was workining very good. Ihave deleted it and then updated to 1.0.4.6. Now most of the channels dont have signal. I am using windows 7 64bits.

Going back to 1.0.4.2

Same problem here, only hdtv on screen, nothing else, came back to 1.0.4.2 and it's well.

i'm trying to understand why so many broken things with 1.0.4.4/1.0.4.5 and what caused the regression - i hope 1.0.4.6 will fixed all the problems.

Мaybe you mean 1.0.4.7 because 1.0.4.6 is broken too, see images from kostading

hello,
i did start with a "TechniSat SkyStar HD 2 PCI". All worked fine, but the Quality of the pictures was bad.
So i did borrow a "TBS 6980" card from a friend. We both have the same hardware with Win 7 64Bit.
Did install the card (parallel to the Technisat), install the V2.0.0.8. driver, select the card in DVB-Viewer -
all worked fine. Very good picture quality.
So I did order the "TBS 6920" card, because i do not have any use of a double card.
I did install it with newest driver V1.0.4.6. I got very good pictures, but only for the
HD-programs. No signal for the SD-programs.
Because of this thread i did search for the V1.0.4.2 driver and have the same problems.
Switching to the Technisat card: all programs available. Have tried a lot for hous now,
installing and deinstalliing drivers and cards, reinstall of DVB-Viewer with only the TBS card,
- the result is allways the same: good signal for the HD-progamms, black screen for SD-programs.
Additional note: I use the Transponderlist of Astra 19,2, and: the EPG-information for the
SD-Programs is available!!!
regards, didiS

New cognitions:
After deletion of the original program-list and a new search, i detected, that there are still some SD-programs.
But not these of my interest. Cannot exactly indicate the characteristics of these programs.
But certainly they are of symbol rates 22000 and 27500, but may be they are only of polarization Hor.
I'm not sure. The HD-programs are certainly of pol. Hor. and Ver.

oldgraf Wrote:Мaybe you mean 1.0.4.7 because 1.0.4.6 is broken too, see images from kostading

sorry, yes, i mean version 1.0.4.7 - i hope it will be ready soon, because lately i'm busy with a lot of things.

@didiS

your problems seem completely unrelated to this topic, because as you can read no one is having any issues with version 1.0.4.2 and basically it's the last good working version at the moment, because some bugs were introduced with the newer versions.

so, it's hard for me to understand why after you tested model 6980 and like it then went and buy the older model 6920 instead, but anyway after all you shouldn't have problems with 6920 either.

please, clarify for me - during scan SD channels are found, but the screen is black when you try to watch them or something else, because SD channels use different video codec than HD channels and if i understand you right it seems like wrong video codec setting in the software, but i'm not sure that i understand your explanation correctly.