Page 1 of 2

TBS 6922SE and Multiple Input Stream channels

PostPosted: Wed Dec 24, 2014 5:37 am
by Marco68
Hi, could anyone confirm that the Second Edition of TBS 6922 is able to demodulate multiple input strem signals?

Mine (the first edition) is not able to. Iwas very surprised when I discovered that TBS 5980 can tune MIS channels even if it's not specified in the page product of Tbs site.

Regards

Marco

Re: TBS 6922SE and Multiple Input Stream channels

PostPosted: Wed Dec 24, 2014 7:45 am
by crazycat
TAS2101 can lock MIS transponders with my StreamReaderEx-BDA, but no possible select input stream. PLS selection also not work.

So for normal MIS+PLS support need minimum stv090xbac based device. 5980 is good choice, i use it from 2011.

Re: TBS 6922SE and Multiple Input Stream channels

PostPosted: Thu Dec 25, 2014 2:04 am
by Marco68
Hi Crazycat, very pleased to read you!
My friend Daniele would like to ask you a question and I'm very interested too. He has a Tbs 5980 as yours and he'g got a problem when switchig from a Mis channel to a DVB-S2 channel. The DVB-S2 channel is always without signal after this sequence. From TBS support they told him about a driver bug. Do you have the same problem and do you think it can be fixed with a new driver release?
Thanks in advance and above all thanks for everything you did for sat lovers!

Re: TBS 6922SE and Multiple Input Stream channels

PostPosted: Fri Dec 26, 2014 3:49 am
by crazycat
Official TBS windows driver for 5980 not support MIS+PLS.

Re: TBS 6922SE and Multiple Input Stream channels

PostPosted: Sat Dec 27, 2014 10:47 pm
by Marco68
Ok, but can you confirm that Tbs 5980 can tune Mis channel the same?
Becouse of its chipset if I understand well.
Best regards

Marco

Re: TBS 6922SE and Multiple Input Stream channels

PostPosted: Sun Dec 28, 2014 9:54 am
by crazycat
I can confirm :) With my modules/dlls (direct hw control) - CrazyScan, EBS Pro, TSReader with StreamReaderEx proxy module, AltDVB, ProgDVB (with my TBS.eBDA2 module).

And linux with unofficial V4L drivers forks like my CrazyCat/linux-tbs-drivers. updatelee/v4l-updatelee

Re: TBS 6922SE and Multiple Input Stream channels

PostPosted: Mon Dec 29, 2014 5:56 pm
by Marco68
Thanks, so I can use Progdvb and Altdvb with your dll/modules.
Altdvb is my favorite choice. What about Dvbdream and Smartdvb? Can they be used with 5980nfor Mis channels?
Thanks in advance.

Marco

Re: TBS 6922SE and Multiple Input Stream channels

PostPosted: Fri Jan 09, 2015 4:02 am
by Marco68
No Mis channel tuned with Altdvb...
Could you tell us if a personalized version has to be used or if we have to add some dll in alt dvb folder? Or something else.
We are using alt dvb 2.2.0 build 3912 with your dev_bda2driver.int v0.2.0.21. We have added TeVii.dll and ttBdaDrvApi_Dll.dll in altdvb folder. But no success...
Thanks for your help

Best regards

Marco and Daniele

Re: TBS 6922SE and Multiple Input Stream channels

PostPosted: Fri Jan 09, 2015 9:10 am
by crazycat
Need bda2 module with direct hw control, now 0.2.1.1239
http://crazycat69.narod.ru/sattelite/Al ... driver.zip

As alternative you can use my CrazyBDA driver instead vendor. This compatible with bda2 module, StreamReaderEx-BDA
http://crazycat69.narod.ru/sattelite/wip/CrazyBDA.zip

Re: TBS 6922SE and Multiple Input Stream channels

PostPosted: Fri Jan 09, 2015 11:46 pm
by piripino
Thanks to my friend Mark for opening the topic .... I wanted to know from Crazycat kindly how to install its driver, I did not succeed. Thanks in advance