TBSDTV Community Forum

Posted: **Sun Sep 25, 2011 3:56 am**

We use the TBS 6984.
When the produce scan-s2 in DVB-S2 (8QPSK), the card does not lock and get the following dmesg:
[ 237.936495] TurboSight TBS 6984 Frontend:
[ 237.936496] tbs6984fe - modulation 6 is not supported

driver last
Thanks

Posted: **Mon Sep 26, 2011 10:04 am**

Hi

Would you mind tell us which parameter you are use to lock S2-8PSK TP.because if you use wrong parameter you can lock S2 TP.

Thanks

Posted: **Tue Nov 15, 2011 5:19 am**

Getting the same error here,

Code: Select All Code: root@dvb-s#:~/tbs/scan-s2# scan-s2 -t1 dvb-s/AMC1-103w API major 5, minor 3 scanning dvb-s/AMC1-103w using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' initial transponder DVB-S 11760000 H 26670000 AUTO AUTO AUTO initial transponder DVB-S2 11760000 H 26670000 AUTO AUTO AUTO initial transponder DVB-S 11828000 V 5789000 AUTO AUTO AUTO initial transponder DVB-S2 11828000 V 5789000 AUTO AUTO AUTO (...) ----------------------------------> Using DVB-S >>> tune to: 11760:hS0:S0.0W:26670: DVB-S IF freq is 1160000 WARNING: >>> tuning failed!!! >>> tune to: 11760:hS0:S0.0W:26670: (tuning failed) DVB-S IF freq is 1160000 WARNING: >>> tuning failed!!! ----------------------------------> Using DVB-S2 >>> tune to: 11760:hS1:S0.0W:26670: DVB-S IF freq is 1160000 WARNING: >>> tuning failed!!! >>> tune to: 11760:hS1:S0.0W:26670: (tuning failed) DVB-S IF freq is 1160000 WARNING: >>> tuning failed!!! ----------------------------------> Using DVB-S >>> tune to: 11828:vS0:S0.0W:5789: DVB-S IF freq is 1228000 WARNING: >>> tuning failed!!! >>> tune to: 11828:vS0:S0.0W:5789: (tuning failed) DVB-S IF freq is 1228000 WARNING: >>> tuning failed!!! ----------------------------------> Using DVB-S2 >>> tune to: 11828:vS1:S0.0W:5789: DVB-S IF freq is 1228000 WARNING: >>> tuning failed!!! >>> tune to: 11828:vS1:S0.0W:5789: (tuning failed) DVB-S IF freq is 1228000 WARNING: >>> tuning failed!!! (...)

Code: Select All Code: dmesg/kernel log: Nov 14 15:15:01 dvb-s kernel: [14467.634854] TurboSight TBS 6984 Frontend: Nov 14 15:15:01 dvb-s kernel: [14467.634856] tbs6984fe - modulation 6 is not supported Nov 14 15:15:04 dvb-s kernel: [14470.470748] TurboSight TBS 6984 Frontend: Nov 14 15:15:04 dvb-s kernel: [14470.470750] tbs6984fe - modulation 6 is not supported Nov 14 15:15:07 dvb-s kernel: [14473.338546] TurboSight TBS 6984 Frontend: Nov 14 15:15:07 dvb-s kernel: [14473.338548] tbs6984fe - modulation 6 is not supported Nov 14 15:15:10 dvb-s kernel: [14476.206343] TurboSight TBS 6984 Frontend: Nov 14 15:15:10 dvb-s kernel: [14476.206345] tbs6984fe - modulation 6 is not supported

Code: Select All Code: root@dvb-s:~/tbs/scan-s2# lsmod | grep tbs tbs6984fe 75213 4 saa716x_tbs_dvb 28597 0 tbs6928fe 17521 1 saa716x_tbs_dvb tbs6922fe 17837 1 saa716x_tbs_dvb saa716x_core 48957 1 saa716x_tbs_dvb i2c_algo_bit 13199 2 i915,saa716x_tbs_dvb stv090x 53193 1 saa716x_tbs_dvb dvb_core 89930 4 saa716x_tbs_dvb,saa716x_core,cx23885,videobuf_dvb

Code: Select All Code: root@dvb-s:~/tbs/scan-s2# lsmod | grep cx cx23885 134938 0 rc_core 25734 8 ir_lirc_codec,ir_mce_kbd_decoder,ir_sony_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_rc5_decoder,ir_nec_decoder,cx23885 cx2341x 23603 1 cx23885 videobuf_dma_sg 18710 1 cx23885 videobuf_dvb 13820 1 cx23885 dvb_core 89930 4 saa716x_tbs_dvb,saa716x_core,cx23885,videobuf_dvb videobuf_core 25097 3 cx23885,videobuf_dma_sg,videobuf_dvb v4l2_common 15793 2 cx23885,cx2341x videodev 94355 3 cx23885,cx2341x,v4l2_common btcx_risc 13400 1 cx23885 tveeprom 17009 1 cx23885

Code: Select All Code: root@dvb-s:~/tbs/scan-s2# uname -a Linux dvb-s 3.0.0-12-generic-pae #20-Ubuntu SMP Fri Oct 7 16:37:17 UTC 2011 i686 i686 i386 GNU/Linux

Posted: **Tue Nov 15, 2011 5:23 am**

Additionally, I couldn't compile scan-s2:

Code: Select All Code: root@dvb-s:~/tbs/scan-s2# make gcc -I../linux-tbs-drivers/linux/include -c scan.c -o scan.o In file included from scan.c:48:0: atsc_psip_section.h:57:1: note: offset of packed bit-field ‘reserved2’ has changed in GCC 4.4 scan.c:52:2: error: #error scan-s2 requires Linux DVB driver API version 5.1! make: *** [scan.o] Error 1

So i tweaked the scan.c:

Code: Select All Code: #if DVB_API_VERSION != 5 || DVB_API_VERSION_MINOR != 1

to

Code: Select All Code: #if DVB_API_VERSION != 5 && DVB_API_VERSION_MINOR < 1

And it compiled fine.

This may be related to the problem above,
I will be appreciated for any help in resolving this problem
Thanks
Tom

Posted: **Tue Nov 15, 2011 8:43 am**

tombgp Wrote: dvb-s/AMC1-103w
initial transponder DVB-S 11760000 H 26670000 AUTO AUTO AUTO
initial transponder DVB-S2 11760000 H 26670000 AUTO AUTO AUTO
initial transponder DVB-S 11828000 V 5789000 AUTO AUTO AUTO
initial transponder DVB-S2 11828000 V 5789000 AUTO AUTO AUTO
(...)

TBS6984 haven't got blindscan hardware. Try to complete AUTO AUTO AUTO with real parameters
For example:

Code: Select All Code: S1 11760000 H 26670000 7/8 35 QPSK

Best regards.

TBSDTV Community Forum

modulation 6 is not supported

modulation 6 is not supported

Re: modulation 6 is not supported

Re: modulation 6 is not supported

Re: modulation 6 is not supported

Re: modulation 6 is not supported