TBSDTV Community Forum

Look like I2C-access support broken in latest 1.0.2.3, 1.0.2.5 drivers for TBS5980.
So CrazyScan, BLScan and etc not work.

P.S. TBS6925,5925 still work

crazycat Wrote:Look like I2C-access support broken in latest 1.0.2.3, 1.0.2.5 drivers for TBS5980.
So CrazyScan, BLScan and etc not work.

P.S. TBS6925,5925 still work

I can confirm this is the case. I updated to the latest driver and lost Crazyscan support. I have since reverted to the supported driver. It would be good if new driver releases maintained the I2C access as crazycat's software is very good.

And will be great, if all QBox'es drivers will be updated with I2C-access interface like 5980/5925

Does CrazyScan, BLScan, etc, work with the latest driver 1.0.2.6, or I2C access is still broken? A friend of mine wants to buy the TBS5980, and I would like to know which is the best version of drivers to work with.

Hi All

All is ok now,Please just use the latest version.

Thanks

Hi,
actual status on my PC-Win7 32b with CrazyScan:
19:24:38 StreamReaderEx BDA Ver:1.1.0.1036-commited (Sep 16 2012, 18:54:28)
19:24:38 Log level = 1
19:24:38 DLL_PROCESS_ATTACH hModule = 63870000
19:24:38 CheckForDVBEx(0x012A7B20)
19:24:38 PID filtering disabled !
19:24:38 Power-off LNB on exit: ENABLED
19:24:38 SendDiSEqC use 2 repeats
19:24:38 Default modulation: AUTO
19:24:38 Default spectral inversion: AUTO
19:24:38 Default pilot: AUTO
19:24:38 Default rolloff: AUTO
19:24:38 Preffered BDA device type: Win7
19:24:38 Available BDA-devices:
19:24:39 Device 0
19:24:39 Name: TBS 5980 CI Tuner
19:24:39 Type: DVB-S/S2
19:24:39 StartDVBEx(0)
19:24:39 Device_ID: 0
19:24:39 Use Device 0
19:24:39 Tuner filter: TBS 5980 CI Tuner
19:24:39 Capture filter: TBS 5980 CI Capture
19:24:39 Microsoft Windows7 BDA extension used !
-and show info aout unsuport

actual status with Blscan in Win7 32b:
19:48:36 StreamReaderEx BDA Ver:1.1.0.1036-commited (Sep 16 2012, 18:54:28)
19:48:36 Log level = 1
19:48:36 DLL_PROCESS_ATTACH hModule = 67000000
19:48:36 CheckForDVBEx(0x010D1000)
19:48:36 PID filtering disabled !
19:48:36 Power-off LNB on exit: ENABLED
19:48:36 SendDiSEqC use 2 repeats
19:48:36 Default modulation: AUTO
19:48:36 Default spectral inversion: AUTO
19:48:36 Default pilot: AUTO
19:48:36 Default rolloff: AUTO
19:48:36 Preffered BDA device type: AUTO
19:48:36 Available BDA-devices:
19:48:36 Device 0
19:48:36 Name: TBS 5980 CI Tuner
19:48:36 Type: DVB-S/S2
19:48:36 StartDVBEx(0)
19:48:36 Device_ID: 0
19:48:36 Use Device 0
19:48:37 Tuner filter: TBS 5980 CI Tuner
19:48:37 Capture filter: TBS 5980 CI Capture
19:48:37 Tuner IC: STB6100
19:48:37 Frontend/demod IC: STV090X (cut 3.0)
19:48:37 TBS STB6100/STV090X direct control used !
19:48:37 BBGain = 8 dB
19:48:37 Turbosight (QBOX - Cypress FX2 based) BDA extension used !
19:48:37 + Turbosight BlindScan support with STV090X
19:48:37 + Turbosight IR control support
19:48:37 + Turbosight CI support
19:48:37 + Turbosight I2C access support
19:48:37 + Turbosight fast LNB control support
-and start scan

maybe some idee for help with CrazyScan ?
regards