Page 1 of 1

Adapter0 not receiving DVB-S2 Channels

PostPosted: Thu Jun 09, 2011 3:46 am
by chd
I am using Ubuntu 11.04 64bit and AMD processor with latest driver downloaded from TBS website.

Adapter0 scanning only DVB-S channels but Adapter1 scans both DVB-S and DVB-S2 channels. I tried to swap sat-lite feed but that hasn't changed anything.

scan-s2 not scanning DVB-S2 channels at all and tvheadend showing faint/bad signal against DVB-S2 freqs.

Re: Adapter0 not receiving DVB-S2 Channels

PostPosted: Mon Oct 31, 2011 7:44 pm
by veehexx
interesting, i too am using 11.04 x64 and latest drivers (111017) and have the same issue - just it's on adaptor1. (i am using the 6891 card though)
cabling is fine - i've swapped coax feeds, and i get a perfect signal on adaptor0 regardless of which coax cable im using.

i'm just recompiling the drivers to see if that helps, as i'm sure it was the other way around this morning (adaptor1 worked, 0 didnt)....
edit: recompiling didnt work. same issue.

Re: Adapter0 not receiving DVB-S2 Channels

PostPosted: Sun Nov 06, 2011 3:30 am
by veehexx
justs o you know, TBS support have determined that my card is faulty, so I'm going through RMA with the reseller.