TBSDTV Community Forum

Though I'm still very disappointed by the poor performance of TBS8921 I've purchased a TBS6925. This card has an excellent performance though only by means of the outstanding 3rd party tool CrazyScan. A big up to @crazycat!

Again, tools provided by TBS are of poor quality and buggy. According to the description "How to watch free MTV HD and MTV Music HD channels with 6925
" given by @Steven I tried to set the mux_id of the MIS on 12,5W, 12718H . But it didn't work. Only with CrazyScan I could tune to the transponder and set the id. The corresponding LNB for my steerable dish is on port4 (lnb4 or B/B) of a multiswitch. After examining the diseqc commands I discovered that port switching of TBSRecorder is faulty.

TBSRecorder for lnb4:
EO 10 38 FC
EO 10 38 FE
EO 10 38 FC
EO 10 38 FE

it should be:
EO 10 38 FC
EO 10 38 FE
EO 10 38 FD
EO 10 38 FF

same for the other lnbs, though there I don't need the tool

Hi Derrick

Thanks for your test report.
We have updated TBS6925 Recorder,would you mind to have a test about the diseqc.
here is the linker:
http://www.tbsdtv.com/download/TBS6925/ ... er(3.0.0.5).rar
Thanks

Thanks, diseqc 1.0 is working now properly

could you please fix the graphics (middle of the window)



apparently the newly added framelength and spectrum is causing trouble.

Spectrum seems to be a fake because it always reads IQ-normal

Hi Derrick

About the framelength and spectrum,it need to use the latest driver,you can download it later on our download page.
and help me test about the UI.I have updated TBS6925 Recorder.
Really thanks.

thx, that looks better

FrameLength and Spectrum are working now but Spectrum ist wrong! IQ_Swapped should read Normal and vice versa (same is true for CranzyScan)