Page 1 of 2

For eumetsat new signal not stable problem(Solved)

PostPosted: Thu Jul 03, 2014 3:41 pm
by steven
Hi All

Update: Great news that we have already solved this problem, Please use our latest driver and
TBSrecorder ,TBSIPtools.

TBS6925:
http://www.tbsdtv.com/download/document/tbs6925/tbs6925-windows-driver_v1.0.1.23.zip

TBS5925:
http://www.tbsdtv.com/download/document/tbs5925/tbs5925-windows-driver_v1.0.1.11.zip

TBSIPtool for TBS6925 and TBS5925
http://www.tbsdtv.com/download/document/common/tbs-iptool_v3.0.4.0-6925&5925.zip

TBS Recorder for TBS6925 and TBS5925
http://www.tbsdtv.com/download/document ... .0.0.8.zip

and a user guide how to lock Eumetsat signal:
http://www.tbsdtv.com/download/document/common/How-to-lock-Eumetsat-VCM-signal-with-TBS-IP-tool.pdf

Any problem with this,Please email to support#tbsdtv.com . :)


Thanks

Kind Regards

steven

Re: For eumetsat new signal not stable problem

PostPosted: Fri Jul 04, 2014 12:39 pm
by satesco
Hi steven,
Look in your pm.
Best regards

Re: For eumetsat new signal not stable problem

PostPosted: Fri Jul 04, 2014 1:33 pm
by dogman
If I have understood this correctly, you are saying that you will replace any 6925 card with this new card?

Is that right?

Re: For eumetsat new signal not stable problem

PostPosted: Sat Jul 05, 2014 10:08 am
by crazycat
steven Wrote:We did found some problem with 6925 to receive Eumetsat new signal:
eumetsat_signal.jpg


Maybe main problem NON STANDARD Rolloff 5% ? :) stv090x report rolloff 20% and we have bugs :)

Rolloff 5% is part of dvb-s2x extension. Look like Newtec want promote own new dvbs2x-compatible modems and setup this s2x modulation :)
But Eumetcast still provide transponder info as DVB-S2 and compatible devices with stv090x :) And users report same reports about packet losses with many devices including 5925/6925 :)

P.S. First time planned SR=30000, rolloff 20% - this fit to standard 36MHz transponder :) And stv090x receive without problems :)

Re: For eumetsat new signal not stable problem

PostPosted: Sat Jul 05, 2014 8:55 pm
by mikeg4cfz
Well done TBS for dealing with this problem in a positive and excellent way, looking forward to trying out new Tuner.

Re: For eumetsat new signal not stable problem

PostPosted: Sat Jul 05, 2014 9:39 pm
by dogman
So what is the procedure for the exchange of cards and do we wait for a month for TBS to build up stock?

Re: For eumetsat new signal not stable problem

PostPosted: Sat Jul 05, 2014 11:54 pm
by satesco
steven Wrote:For eumetsat new signal not stable problem


signal on 11263 H,33000,3/5-Eumetcast:
Image
Eumetcasts with TSAnalyzer:
Image
Eumetcast with TBS Data Service:
Image

Re: For eumetsat new signal not stable problem

PostPosted: Sun Jul 06, 2014 4:36 am
by satesco
Hi steven,

I've done tests with TSAnalyzer later on 11263 H(Eumetcast)and this time stream lost packets.If you think it helps,I put a ts.file recorded on this stream-HERE

Image

Re: For eumetsat new signal not stable problem

PostPosted: Mon Jul 07, 2014 9:55 am
by steven
dogman Wrote:If I have understood this correctly, you are saying that you will replace any 6925 card with this new card?

Is that right?

Hi dogman

If you are the member of eumetsat,we will help you replace a new one.because for other satellite it is ok, no problem
no need to replace a new one.

Thanks

kind Regards

steven

Re: For eumetsat new signal not stable problem

PostPosted: Mon Jul 21, 2014 1:36 am
by mikeg4cfz
Steven, Hi, I am given to understand here in Europe that some new software has been released by Crazycat to enable TBS-6925 to receive EUMETSAT DVB-S2/VCM Transmissions on GNU/Linux systems, if correct will you be issuing software up-date for Windows XP/7/8, as full operational data transmissions start between August 4th to 8th 2014, also understand new Tuner TBS-6983 is under test in Europe with excellent results. Regards, mikeg4cfz.