TBSDTV Community Forum

In TS mode lock OK



In GS mode not locked on same transponder, why?

That is not error. If transponder use Transport Stream not Generic Stream, You cannot lock it as Generic Stream, because it is not Generic Stream (if lock would be present - that would be error). One transponder cannot be TS and GS at the same time.

as I known TS and GS stream(streams) encapsulates in BB-Frames when transponder uses DVB-S2. may be it righter to record transponders containes TS-streams as BB-Frames, when selected mode is GS? older version of you driver & tbsrecord work as I wrote. in new version you removed that ability.

Hi someguy

Next day,We will have a update about this problem.
and sorry about this.

Thanks

Hi

Would you mind use this new driver to have a test.
here is the linker:
http://hotfile.com/dl/129690637/7eabf14 ... 1.rar.html
and send a test report here.

Thanks

thank you, Steven! i'll check your driver tommorow.

new driver works better! GS and TS streams captures in original BB-frame format, as I wished. but in end of captured files(about 100 kbytes) i see some garbage(fake bytes) ...

someguy Wrote:new driver works better! GS and TS streams captures in original BB-frame format, as I wished. but in end of captured files(about 100 kbytes) i see some garbage(fake bytes) ...

Hi someguy
Would you mind have more test,and what about the older driver is it have garbage?
Thanks

I seem to be having some issues with the OEM DVD Dream v15e OEM software (Trial version of v15f from the DVD Dream website yields the same results.) While I have no issue acquiring lock in TBS Recorder or TBS IP, whever I start DVB Dream (with the exception of once where a manual scan actually returned data), it appears there is no signal (perhaps some sort of software config issue.) I do have the correct parameters set (I'm a long time DVB user and RF engineer with experience in Satellite comms) as well as the proper LNB Local Oscillator freq, etc. At times, I have been able to start TBS recorder or TBS IP, lock to a channel, start DVB Dream, and a signal be indicated which vanishes after any of the parameters (such as transponder frequency) are set.