TBSDTV Community Forum

Hi ,
I used szap command line
szap-s2 -a 5 -l C-BAND -c s2.conf -n 010


status 1f | signal af5a | snr a58b | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal af4a | snr a58b | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal af6a | snr a58b | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal af4a | snr a221 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal af6a | snr a3d6 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal af6a | snr a58b | ber 00000000 | unc 00000000 | FE_HAS_LOCK

It keeps on repeating. It means it has got tuned or locked.
Now how do i play it in ffplay or vlc ? When i use webpage i used to get udp'://ip addres so on ..
But in this case i am not sure how to play and there are other channels . How do i play them if they are on same transponder simultatneously?

i got the answer szap is only for testign and tuning . It will not stream to network.

hello

which backend you started? tvheadend or vdr?

i am using dvblast to tune .Scan shows the tranponders but it doesnt show up in dvblast.it shows only first four of the transponder. Only for this transponder ,there is a problem. I wrote to support who doesnt have any solution