TBSDTV Community Forum

hello,
few days i'm working on tvheadend 3.9.636 (orginal with MOI+) DVBinputs advanced configuration. My dish configariotn is: switch (2 LNB 1-Circular and 2-universal ) and rotor (gotox mode nor usual). If i use DVB-input -> adapters (TBS 6991SE) -> advanced mode -> LNB Circular, Rotor gotox, Switch Generic (AA -0- A) i can't find muxes signal. Wiht other universal LBN is the same (switch AB-0-A). If change adapters mode to switch or only one LNB - all working fine.
I have tried Tvhedand 4.0.6 - but had another problem: very slow switching channels (status - subscription - state - testing (long time 1 or 2 min.))
Any suggestion?

Somebody has driver(firmware) for MOI+ TBS6991SE adapter: https://github.com/ljalves/linux_media/ ... stallating?

Hi

Maybe you can have a try with tvheadend 4.1.0
you can check it here :
viewtopic.php?f=164&t=9594

Thanks

Kind regards

steven

Hello,
thank you for you answer and for your work with rvheadend (i mean 4.1.0).
When i changing channel i must wait about 2-3 minutes to see it. As i wrote, i tried tvheadend 3.6 (original), 4.0.6 and 4.1.0 but problem exist. I found on tvheadend forum about ljalves drivers for TBS adapters and i will try it (maybe this is solution). One problem is: i don't have experience with crosscompile
Any ideas how to solve this strange problem?
With vdr all working fine (same sat configuration).

Hello,
problem solved.

How did you manage to solve it?