Page 1 of 1
How to configure oscam
Posted:
Sat May 03, 2014 4:45 amby bzoli72
Hi all!
I installed Matrixtv 1.0.0.6-1.
Settigns oscam.server file in startup config.
oscam connect to remote server, but no picture on scrambled channels.
In oscam log no request from user.
Please help me, how to configure correctly XBMC -- VDR -- oscam.
Thenks: bzoli72
Sorry for my bad english
Re: How to configure oscam
Posted:
Thu May 08, 2014 10:12 amby alanb2121
I have a similar problem. I can get TVheadend working and talking to OSCAM but not VDR.
Also VDR client in XBMC seems to work but tvheadend client in XBMC is not working
Re: How to configure oscam
Posted:
Thu May 08, 2014 11:18 pmby luistobcn
I can not get it to work? dvb-s tvheaden and Oscam.
Please can you help me.
Re: How to configure oscam
Posted:
Sat May 10, 2014 6:49 pmby mijanek
alanb2121 Wrote:Also VDR client in XBMC seems to work but tvheadend client in XBMC is not working
Tvheadend client in xbmc is working fine. I'm using it all the time without any issue.
Re: How to configure oscam
Posted:
Sat May 10, 2014 9:28 pmby luistobcn
mijanek Wrote:alanb2121 Wrote:Also VDR client in XBMC seems to work but tvheadend client in XBMC is not working
Tvheadend client in xbmc is working fine. I'm using it all the time without any issue.
HI.But,tvheaded client working with dvb-s2 ?and oscam.
Re: How to configure oscam
Posted:
Sat May 10, 2014 9:48 pmby mijanek
luistobcn Wrote:HI.But,tvheaded client working with dvb-s2 ?and oscam.
This is not client who is talking to dvb-s2, but the tvheadend server listening on
http://*:9981/. You have to configure it.
Re: How to configure oscam
Posted:
Sun May 11, 2014 2:38 amby luistobcn
mijanek Wrote:luistobcn Wrote:HI.But,tvheaded client working with dvb-s2 ?and oscam.
This is not client who is talking to dvb-s2, but the tvheadend server listening on
http://*:9981/. You have to configure it.
Ah,ok thanck.
Re: How to configure oscam
Posted:
Tue May 13, 2014 4:11 pmby luistobcn
I do not work for talk tvheaden server and oscam no generate camd.socket.
I can't do work in mode oscam,in vdr or tvheaden.
the oscam server connet.
i've been fifteen days with matrix and tbs5980.not operate these configurations.
I'm tired of wasting time.
I thought that everything was more advanced tvmatrix OS
Re: How to configure oscam
Posted:
Wed May 14, 2014 5:36 pmby diabloss
For dvbapi + Tvheadend will need camd.socket file or an option for LD_PRELOAD=/path/to/capmt_ca.so cam_client & which sadly on this version of Matrix file sistem Tvheadend won't work.
Imo at this point best combination for matrix tv device is vdr with vdr-sc plugin + oscam as the vdr seems to be more stable for watching /zapping via xbmc live tv channels.
I highly advise if possible to provide to the end users a method to enable vdr-sc plugin support
as there are many of them that are NOT using card readers connected on to the matrix (dvbapi cannot perform while subscription card is on another machine)
but having dedicated machines for their subscriptions (raspberry pi in my case).
Regards