Page 1 of 1

device not working

PostPosted: Wed Aug 25, 2010 12:38 am
by difei
Seems the driver not loading, I do not know why, I have a TBS QBOX connected to my debian box:
Code: Select All Code
2.6.32-5-amd64 #1 SMP Thu Aug 12 13:01:50 UTC 2010 x86_64 GNU/Linux


Code: Select All Code
zdf:/lib/firmware# dmesg | tail
[  506.476793] usb 1-2.1: new high speed USB device using ehci_hcd and address 9
[  506.569536] usb 1-2.1: New USB device found, idVendor=0572, idProduct=6830
[  506.569544] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  506.569550] usb 1-2.1: Product: BS6830
[  506.569554] usb 1-2.1: Manufacturer: Bestunar Inc.
[  506.569559] usb 1-2.1: SerialNumber: 20100502
[  506.569947] usb 1-2.1: configuration #1 chosen from 1 choice


Code: Select All Code
/lib/firmware# ls
av7110  cis  cpia2  dabusb  dsp56k  dvb-usb-tbsqbox-id5910.fw  keyspan_pda  ttusb-budget  vicam


Code: Select All Code
/lib/modules# find . -name *qbox*
./2.6.32-5-amd64/kernel/drivers/media/dvb/dvb-usb/dvb-usb-tbsqbox.ko
./2.6.32-5-amd64/kernel/drivers/media/dvb/dvb-usb/dvb-usb-tbsqbox2.ko
./2.6.32-5-amd64/kernel/drivers/media/dvb/dvb-usb/dvb-usb-tbsqboxs2.ko


Could somebody tell me why?

Re: device not working

PostPosted: Wed Aug 25, 2010 1:28 pm
by cody
difei Wrote:
Code: Select All Code
zdf:/lib/firmware# dmesg | tail
[  506.569536] usb 1-2.1: New USB device found, idVendor=0572, idProduct=6830

[  506.569550] usb 1-2.1: Product: BS6830
[  506.569554] usb 1-2.1: Manufacturer: Bestunar Inc.



if that is your USB device, it's not made by TBS. why you think you have TBS QBOX USB device?

please, post the output of 'lsusb' when your DVB USB device is connected, but at least based on information you provided so far you just don't have TBS hardware.

Re: device not working

PostPosted: Wed Aug 25, 2010 3:57 pm
by okbet
Hi difei,
Could you please upload a picture of the USB device you got for clarification?